Village-ContourAsset 1.png

Real Estate

Jack’s Point Residential Real Estate Resources

Real Estate Signage

Residential Guidelines


A1 size (small) for single property lots

The Frame  posts measure 40mm each in diameter.  The internal signage size is A1 (841mm wide x 594mm high), less 80mm wide for overlap of posts. 

Reverse side of sign - It must be the same as the front colour, or you may repeat the exact same sign graphics from the front side. Other options permitted on the back is to repeat the frame on the front; this may improve the appearance of the sign and give it extra strength.

Note: Depth of posts may vary depending on position and ground conditions. Exercise care before you dig, check for underground services, telecom and electrical and cables.

Colour - White graphics on solid colour background. Colour background is black. Posts and frame are to be stained in 'Black Bean'.

Base artwork available below.


A0 size (large) for two of more property lots

The Frame  posts measure 40mm each in diameter.  The internal signage size is A0 (1189mm wide x 841mm high).

Reverse side of sign - It must be the same as the front colour, or you may repeat the exact same sign graphics from the front side. Other options permitted on the back is to repeat the frame on the front; this may improve the appearance of the sign and give it extra strength.

Note: Depth of posts may vary depending on position and ground conditions. Exercise care before you dig, check for underground services, telecom and electrical and cables.

Colour - White graphics on solid colour background. Colour background is black. Posts and frame are to be stained in 'Black Bean'.

Base artwork available below.

 


Real Estate Sign Base Artwork

Base artwork is in Adobe Illustrator and PDF format. Fonts are included and must be installed. Adapt the base artwork to fit your requirements. Check with your sign maker or printer for exact size and production requirements.